Has your kitchen faucet recently started dispelling less amount of water? This could be because the water pressure in your faucet has turned low which has resulted in lesser water spilling out of the faucet. This could be due to multiple reasons but there is nothing to worry about because it can be easily fixed. You can investigate the issue yourself without any need of a plumber and can even fix the issue. Not sure how?
Just follow these steps and you will be able to fix your low water pressure issue in no time at all.
Determine the issue
The first step in fixing your low-pressure water issue would be to determine what the cause of the low pressure is. Your faucet might be dispensing a low water pressure because some pipe is wrongly twisted or because there are debris or mineral deposits collected in the faucet or the faucet pipes. So, to make sure that you fix the issue efficiently, you would need to determine the root cause and then apply the necessary solution.
If it is a twisted pipe which is the problem, then you can simply re-adjust the pipe and check whether the issue is resolved or not. If it is, then you can ignore the next steps else, you need to follow the next few steps.Check some Copper chef reviews at homeguyd.
Clear the Aerator
One of the most common reasons for a low water pressure is a clogged faucet aerator which can hinder the flow of the water due to the debris and deposits collected in it. You can fix this issue easily by cleaning the aerator.
All you need to do is remove the aerator from the aerator body and keep all the parts on a clean cloth away from the sink. Then, remove the aerator housing and separate the washer, flow restrictor, mixer, etc. and clean them with the help of a toothbrush. You can also use a vinegar solution to remove the limescale buildup and ensure a better cleaning. Once you have cleaned all the parts, reassemble the parts and fix the aerator back into the faucet.
Clean the Cartridges
Another common reason for low water pressure is that the faucet cartridges are unclean and need to be cleared out for a normal flow. You can do this by cleaning the cartridges with a vinegar solution.
For this, you will first need to switch off the water supply and remove the faucet and the faucet handle with the help of an Allen wrench. Then, unscrew the retaining nut and remove the retaining clip and washer from the cartridge and keep it aside.
Now, take out your cartridge and clean it using a vinegar solution. If you notice that the cartridge is damaged, then you will need to replace it. Once all this is done, reassemble the parts together.
Test the working
Once you have reassembled all the faucet parts, you need to test whether the issue persists or not. If it does, then there is some problem with the main water pipe and you would need to call a plumber to check the same.